Products

Microlab 10-425 Autosampler Vials are Standard ND10mm open top screw glass vials, widely used in HPLC and GC analysis. Be compatible with Agilent, Shimadzu and Waters’ Autosampler.

50mm Vent Filters are sterilizing filter for Venting and Liquid Solutions. It removes microorganisms, particles, precipitates, and undissolved powders larger than nominal pore size such as 0.22μm. The special construction allows minimal hold-up volume and particle shedding, making Vent Filters ideally suited for the critical needs of the pharmaceutical and biotechnology industries. 

Microlab Reusable Filter holders are design for Membrane Filters with diameter ranges from13mm to 300mm. Both Plastic filter holder and Stainless steel Filter are available. Variety connection design are suitable for laboratory and industrial filtration.

Microlab 8-425 Autosampler Vials are Standard ND8mm open top screw glass vials, widely used in HPLC and GC analysis. Be compatible with Agilent, Shimadzu and Waters’ Autosampler.

Microlab 9-425 Autosampler Vials are Standard ND9mm open top screw glass vials, widely used in HPLC and GC analysis. Be compatible with Agilent, Shimadzu and Waters’ Autosampler.

Microlab® Nylon membrane filter is a supported, naturally hydrophilic membrane designed to wet out evenly and retain its superior strength during use in general filtration or medical assays, eliminating the need for wetting agents that could be extracted when filtering aqueous solutions. Nylon membrane filters are flexible, durable and tear resistant, and can be autoclaved at 135º C.High-quality nylon membrane filters are suitable for filtering aqueous solutions and most organic solvents. Nylon membrane filters are suitable for a wide range of biological preparations and can be used where other membranes are unsuitable or difficult to use.

1.The product is made of medical grade USP CLASS VI polyme polystyrene

2.The product is made under a 100,00- class dust-free manufacturing site

3.Surface TC treatment ensures efficient cell attachment.

4.The product assembled with ultrasonic welded technology. 

5.Versatile port design facilitates both pouring and aseptic filling techniques 

6.Gamma radiation sterilization. 

7.The cell culture surface area of one 10-layer Cell Factory unit is equivalent to the area of 36 T-175 flasks.

1.The product is made of medical grade USP CLASS VI polyme polystyrene

2.The product is made under a 100,00- class dust-free manufacturing site

3.Gamma radiation sterilization. 

4.Non-Pyrogenic, DNase/Rnase free

5.Large mouthed design makes easy operation of pipet or cell scraper. The surface of flask is uniform and smooth, hence the clear view can be obtained when microscopic observation.

6.The hydrophobic filter cap can prevent invasion of fungi and bacteria without water absorb. 

7.Two kinds of product line up are providing.

（1）For adherent cell culture: Initial adherence and proliferative property of cells via hydrophilic surface treatment. 

（2）For suspension celI culture: The surface is resistant to cell adherence, which minimizes damage or loss of cell. 

1.The product is made of medical grade USP CLASS VI polyme polystyrene 

2.The product is made under a 100,00- class dust-free manufacturing site 

3.Gamma radiation sterilization.

4.Non-Pyrogenic, DNase/Rnase free

5.Two kinds of product line up are providing.

（1）For adherent cell culture: Initial adherence and proliferative property of cells via hydrophilic surface treatment. 

（2）For suspension celI culture: The surface is resistant to cell adherence, which minimizes damage or loss of cell. 

1.The product is made of medical grade USP CLASS VI polyme polystyrene 

2.The product is made under a 100,00- class dust-free manufacturing site

3.Gamma radiation sterilization.

4.Non-Pyrogenic, DNase/Rnase free

5.Two kinds of product line up are providing.

（1）For adherent cell culture: Initial adherence and proliferative property of cells via hydrophilic surface treatment.

（2）For suspension celI culture: The surface is resistant to cell adherence, which minimizes damage or loss of cell. 

Microlab Quantitative filter paper is mainly used for quantitative chemical analysis of the gravimetric analysis of the pilot trial and relevant analysis experiment. The filter paper can be applied to scientific research, industry agriculture, health, tertiary institutions, teaching experiment, environmental protection test, etc. 

Microlab Qualitative Filter paper is applicable to pharmaceutical, chemical plants producing all kinds of pharmaceutical and solvent filtration. the qualitative filter paper is chiefly used for qualitative chemical analysis and relevant filter separation, as well as manufacturing test paper of relevant purity. The good characterization of folded filter paper compared to the same type of filter paper formation has the advantage of speeding up the flow rate and increasing the load power.

Qualitative filter paper is a kind of filter paper used in laboratory analysis and testing, usually used to separate solid particles or mixtures of sediments and liquids. It has different pore sizes and adsorption properties, and different specifications and materials can be selected according to needs. Qualitative filter paper is commonly used in laboratory applications such as general qualitative analysis, qualitative chemical analysis, and qualitative separation.

Column capacities consist of 1, 3, 6, and 10 ml sizes, etc.

Our manufacturing process minimizes variability and improves recovery and cleanup procedures

1.C8/SAX Octyl/Strong Anion Exchange

2.C8/SCX Octyl/Strong Cation Exchange

3.GCB/NH2 Graphitized Carbon Black/Aminopropyl Bilayer

4.GCB/PSA Graphitized Carbon Black/ Primary-Secondary Amine Bilayer

Column capacities consist of 1, 3, 6, and 10 ml sizes, etc.

Our manufacturing process minimizes variability and improves recovery and cleanup procedures

1.HLB Hydrophilic-Lipophilic Balanced

2.MAX Mixed-mode Anion Exchange

3.MCX Mixed-mode Cation Exchange

4.WAX Weak Anion Exchange

5.WCX Weak Cation Exchange

String wound cartridges are manufactured with structured open outer layers and tight inner layers to offer true depth filtration for high dirt holding capacity and extremely low media migration. The main advantage of the string wound filter cartridge is its exceptionally high structural strength, therefore, they can with stand higher PSID and severe operating conditions.

1.Oil & Chemical.

2.Plating.

3.Mining.

4.Machinery & Equipment.

5.Industrial Water Treatment