Vented Syringe Filter

2025-03-03

Vented Aqueous Solution Filter are sterile syringe filters with a venting for sterilization of low volume aqueous solutions. Special vent design allows the filter to be used multiple times

Product Feature

1.For research use only (RUO).

2.Single use only

3.Vented inlet to prevent air locking

4.on-pyrogenic and non-toxic

Materials

1.Filter membrane material: Hydrophilic PVDF(PVL), Mixed cellulose esters (MCE), Hydrophilic Polyethersulfone(PES), Cellulose acetate(CA) ,pore size 0.22 μm

2.Vent membrane: Hydrophobic polytetrafluoroethylene (PTFE), pore size0.22μm

3.Housing: Polypropylene (PP),Methyl methacrylate-Butadiene-Styrene(MBS)

Application

1.Sterile Syringe filter for the filtration of low volume aqueous solutions

2.Vented design, makes the filter without internal pressure, which made the filter can be used multiple times.

3.Multiple use is perfect for collecting the Precious solutions or target solutions.

Technical Specification

Dimensions
Inlet to outlet	28.7mm(1.14 in.)	Diameter		29 mm (1.14 in.)
Effective filtration area	3.976≈4cm² (0.62 in2)	Temperature limit		45 °C (113 °F)
Pressure limit at 21 °C	7.0 bar (101 psi) inlet and differential	Filtration volume		1–100 mL
Hold-up volume	≤ 0.1 mL after air purge	Sterilization method		GammaIrradiation
Connections	Female Luer-Lok inlet, male Luer-slip outlet	Color		natural
membrane material	Flow rate at 0.7 bar (10 psi), 21 °C		Bubble point (water)/(Ethanol)
MCE	≥ 30 mL/min		≥ 50 psi（0.3447MPa）(Water)
Hydrophilic PES
Hydrophilic PVDF	≥ 30 mL/min		≥14.5 psi（0.10MPa）(Ethanol)
CA